Bluetooth® Dial-Up Networking* with VZAccess Manager

1. Your device must be in Discoverable mode. If your device is not in Discoverable mode, refer to the instructions in the Make Your Device Discoverable section to complete this action.
2. Check the box for "My device is set up and ready to be found" and press "Next" to continue.
   
   


3. The Bluetooth Device Wizard will now try to discover your device. Once your device is found, select it and press "Next" to continue.
   
   
   
   


4. You will need to create a passkey for the device. Select "Let me choose my own passkey" and enter an 8 to 16-digit passkey of your choice. Press "Next" to continue.
   
   


5. Your laptop will now try to connect to your device.
   
   
   • You should get a pairing request for your device. Select "Yes" to accept, enter the passkey code to authenticate the connection, then press "OK" to continue. If the passkey was accepted, you will see the "Paired Successfully" message displayed.
   • Press "OK" to continue. The device is now enabled to connect to the laptop.
   • A pop-up confirmation that the pairing was successfully completed will display.
     
     


6. From VZAccess Manager, select "My device is paired and is ready to be detected", and then press "Next" to continue.
   
   
   
   VZAccess Manager will now detect your Bluetooth-enabled device.
   
   


7. Once VZAccess Manager is configured to use your modem, press "Next" to continue.
   
   


8. Enter your mobile device phone number and press "Next" to continue.
   
   


9. Select "Finish" to complete the VZAccess Manager process.
   
   

1. From the VZAccess Manager menu screen, press the "Connect WWAN" button.
   
   


2. Press "Continue" to establish a Mobile Broadband or NationalAccess connection.
   
   
   
   After pressing "Continue", you will instantly be connected.
   
   

Prev | Next (Page 3 of 4)