Bluetooth® Dial-Up Networking* with VZAccess Manager

1. On the Bluetooth Setup screen, make sure the first option is selected and click "Next" to continue.
   
   


2. On the Bluetooth Service Selection screen, select "Dial-up Networking" and click "Next" to continue.
   
   


3. On the Bluetooth Device Selection screen, you must run your handset in Discoverable mode. To turn your device to Discoverable mode, find your device using the instructions in the Make Your Device Discoverable section. Select the device you wish to enable for Dial-Up Networking and click "Next" to continue.
   
   


4. Click "Finish" to finalize the set-up process and connect to your device.
   
   


5. After you've finished the set-up process, you will be requested to create a paired relationship by entering a PIN code. Once the code has been entered, click "OK" to continue.
   
   
   
   A pairing request should display on your device. Select "Yes" to accept, then enter the PIN code to authenticate the connection. Press "OK" to continue.
   
   
   
   If the PIN was accepted, you will see the message "Paired Successfully". Press "OK" to continue. On the screen Paired Devices, you can verify that the device has been successfully enabled to connect to the laptop.
   
   


6. From VZAccess Manager, select "My device is paired and is ready to be detected", and then press "Next" to continue.
   
   
   
   VZAccess Manager will now detect your Bluetooth-enabled device.
   
   


7. Once VZAccess Manager is configured to use your modem, press "Next" to continue.
   
   


8. Enter your mobile device phone number and press "Next" to continue.
   
   


9. Select "Finish" to complete the VZAccess Manager process.
   
   

1. From the VZAccess Manager menu screen, press the "Connect WWAN" button.
   
   


2. Press "Continue" to establish a Mobile Broadband or NationalAccess connection.
   
   
   
   After pressing "Continue", you will instantly be connected.
   
   

Prev | Next (Page 2 of 4)