Windows Device Manager Conflicts - Casio® G'zOne Commando™

Start Device Manager.

  • Windows 8
    • Right-Click Start Screen > All Apps > Control Panel > System and Security > Device Manager.
  • Windows 7
    • Click Start > Control Panel > System and Security > Device Manager.
  • Windows Vista
    • Click Start > (Settings) Control Panel > (System and Maintenance) > Device Manager.
      Note If prompted, click Continue.
  • Windows 2000 / XP
    • Click Start > (Settings) Control Panel > (Performance and Maintenance) > System > Hardware > Device Manager.

For detailed instructions, refer to Opening Windows Device Manager.

The following devices are normally installed:
Note Depending upon the selected USB connection (e.g. Mass Storage, Media Sync, Charge only), some of the devices may not appear.

Android Phone
CASIO C771 Android ADB Interface
Disk drives
CASIO C771 Storage USB Device
Portable Devices
E:\ (drive letter may vary)
Ports
CASIO C771 USB Virtual Serial Port (COMx)
Universal Serial Bus controllers
CASIO C771 USB Composite Device
USB Mass Storage Device
MTP USB Device

Note If a red X, yellow ! or yellow ? is displayed to the left of a listed device, a conflict is present and the drivers must be updated or reinstalled.
Note Driver conflicts may also be indicated by a device entry labeled Other Devices or Unknown.

If a conflict is present:

  1. Right-click the device then click Update Driver Software.
    Note If using Windows 2000 / XP, right-click the device then click Update Driver.
  2. Click Browse my computer for driver software.
    Note If using Windows 2000 / XP, select Install from a list or specific location (Advanced) then click Next.
  3. Enter C:\Windows\System 32\Drivers in the search field then click Next.
    Note If using Windows 2000 / XP, ensure that Search for the best driver in these locations and Include this location in the search are selected.
    Note The driver location can be entered manually or navigated to by clicking Browse.
    Note If the driver software is not found, a Windows Operating System update may be needed.
  4. Click Close.
    Note If using Windows 2000 / XP, click Finish.