Windows Device Manager conflicts - Verizon Wireless UM150

Start Device Manager.

  • Windows 7
    • Click Start > Control Panel > System and Security > Device Manager.
  • Windows Vista
    • Click Start > (Settings) Control Panel > (System and Maintenance) > Device Manager.
      Note If prompted, click Continue.
  • Windows 2000 / XP
    • Click Start > (Settings) Control Panel > (Performance and Maintenance) > System > Hardware > Device Manager.

For detailed instructions, refer to Opening Windows Device Manager.

The following devices are normally installed:

Disk drives
PANTECH Mass Storage USB Device
Modems
PANTECH USB Modem
Network adapters
PANTECH USB Modem WWAN Driver
Note This adapter only appears when NDIS (Network Driver Interface Specification) mode is enabled.
Portable Devices
Mass Storage
Ports (COM & LPT)
PANTECH USB Modem Serial Port (COM x)
Universal Serial Bus controllers
PANTECH USB Modem Composite Device
USB Mass Storage Device
Device Manager
Note If a conflict is present, a red X, yellow ! or yellow ? is displayed to the left of a listed device or may be indicated by a device entry labeled Other Devices or Unknown. The drivers must be updated or reinstalled.
Conflict

If a conflict is present:

  1. Ensure that the device drivers are installed. Refer to Downloading and installing VZAccess Manager - Windows for additional assistance.
    Note If VZAccess Manager is installed and a driver conflict is still present, continue to step 2.
  2. Right-click the device then click Update Driver Software....
    Note If using Windows 2000 / XP, right-click the device then click Update Driver...
    Update driver
  3. Click Browse my computer for driver software.
    Note If using Windows 2000 / XP, select Install from a list or specific location (Advanced) then click Next.
    Browse to driver
  4. Enter C:\Program Files\PANTECH\PANTECH USB Modem into the search window then click Next.
    Note If using Windows 2000 / XP, ensure that Search for the best driver in these locations andInclude this location in the search are selected.
    Note The driver location can be entered manually or navigated to by clicking Browse.
    Update location
  5. Click Close.
    Note If using Windows 2000 / XP, click Finish.
    Update complete